CN
EN

Case

Home > Case >

Xiangyangtian multifunctional steam cleaner function operati

2020-02-25

Take a look at the badger, don't miss it when passing by!
 
For some veterans who have been in household appliance cleaning for a long time, Xiangyang Tian's steam cleaning device is easy to operate, but for some newbies, the functions of this device will not operate yet. The following is the operation method of Xiaobian finishing. It is recommended to collect pure dry goods!
 
1. Place the Xiangyangtian cleaning equipment horizontally, find the suction pipe and the ozone pipe, and connect the suction pipe and the ozone pipe to the suction and ozone ports on the back of the equipment
 
2. The Xiangyangtian steam cleaner set includes three types of spray heads, which can be flexibly used according to specific use conditions and installed on the spray gun.
 
3. Connect the leakage protection plug of the device to the socket using the provided conversion plug, and turn on the switch on the leakage protection plug and the air switch of the device.
 
4. Adjust the gear adjustment knob on the front panel of the device and press and hold the spray gun to spray cold water
 
5. Turn on the red heating switch and press and hold the spray gun to spray hot water in about 30 seconds.
 
6. Turn on the red heating switch and the blue steam switch at the same time, press and hold the spray gun to discharge the liquid water from the equipment to the water outlet pipe, and steam can be sprayed in about 30 seconds
 
7. After using the hot water or steam function, turn off the red heating switch and the blue steam switch to allow the equipment to pass cold water to cool down the equipment and prolong the service life of the steam cleaning equipment
 
8. Take the filter of the suction pipe out of the water, press and hold the spray gun, and drain the water left in the sun steam cleaning equipment.
 
9.Turn off the air switch of Xiangyangtian steam cleaning equipment